Description
MicroLuxx mats feature traditional nylon fibers blended with finer denier fibers that work together to absorb more moisture than standard mats.
MicroLuxx Mat
- Description
- Additional information
- Recommended Uses
- Laundering Instructions
- Cleaning Instructions
- Specifications
Additional information
| Weight | N/A |
|---|---|
| Color | Black, Blue/Black, Brown/Black, Midnight Grey, Red Pepper, Slate Grey |
| Size | 2.5' x 3', 2.5' x 4', 2' x 3', 3' x 4', 3' x 5', 3' x 10', 4' x 6', 4' x 8', 5' x 10', 5' x 12', 5' x 8', 6' x 10', 6' x 12', 6' x 8' |
Recommended for indoor use at commercial entryways, in lobbies or any interior location where additional traction or moisture control is needed.
MicroLuxx mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. For heavy soil, increase temperature to max 140 degrees F (60 degrees C). Break should not exceed pH of 9.5; use low pH non-ionic detergents.
- Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
- Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
- Break 2-3 minutes, high water level, 120 degrees F (49 degrees C)
- Rinse 2 minutes, high water level, cold
- Rinse 2 minutes, high water level, cold
- Extract (low speed) 1-2 minutes
- Shake out (rotate wheel at wash speed with drain open) 1 minute
- Extract (low speed) 3-5 minutes
- Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
- Cool down 5 minutes
- Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C). If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C). This will reduce moisture retention following extraction.
MicroLuxx mats can be commercially laundered (see laundering instructions) or cleaned using the instructions below:
- Vacuum regularly (daily in high-traffic commercial areas; weekly in lower-traffic areas)
- Extract or hose off as needed to remove heavy soil/debris
- Hang mat to dry
Always make sure the mat is dry before placing it back in service.
SURFACE
Material: 900 denier/128 filament 3-ply solution-dyed type 6 nylon
Construction: Cut pile
Weight: 33 ounces/yard2
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2)
BACKING OPTIONS
Material: Nitrile rubber (smooth, or universal cleated)
Thickness Options:
Standard 52-mil (body thickness 52-mil; border thickness 94-mil)
Medium duty 65-mil (body thickness 65-mil; border thickness 107-mil)
Heavy duty 90-mil (body thickness 90-mil; border thickness 90-mil)
STANDARDS & TESTING
- Certified high-traction by the National Floor Safety Institute (NFSI)
- Passes flammability standard DOC FF1-70
